مشخصات پژوهش

عنوان	Microstructure and Tribological Properties of Nanostructured Aluminum Reinforced with SiC Nanoparticles Fabricated by Powder Metallurgy Route
نوع پژوهش	مقاله چاپ‌شده در مجلات علمی
کلیدواژه‌ها	Mechanical properties, Wear, Composites Mechanical alloying/milling Scanning electron microscopy (SEM)
چکیده	Nanostructured Al and Al/SiC nanocomposites were prepared by high energy mechanical milling and hot pressing process. The tribological behavior of the produced materials was studied by a ball-on-flat tribometer. Dry sliding wear tests indicated that the nanocomposite with 4 vol% SiC exhibits a lower wear loss and a higher coefficient of friction compared to nanostructured Al. This was due to reduction of the extent of wear deformation in the subsurface region and difficult plastic deformation of debris, resulting from grain size refinement and nanoparticle strengthening synergistic effects, during sliding. Investigation of worn surfaces showed that delamination and abrasion are dominant wear mechanisms for the nanostructured Al and the Al/SiC nanocomposite.
پژوهشگران	سعید علیپور (نفر دوم)، محمد رضا اکبرپور آرباطان (نفر اول)