عنوان
|
Numerical simulation of highly efficient dye sensitized solar cell by replacing the liquid electrolyte with a semiconductor solid layer
|
نوع پژوهش
|
مقاله چاپشده در مجلات علمی
|
کلیدواژهها
|
Dye sensitized solar cell Solid-state solar cell Liquid electrolyte Al-Modified titanium dioxide P3HT
|
چکیده
|
A dye-sensitized solar cell (DSSC) with FTO/TiO2/Dye/Electrolyte/FTO structure was simulated by using SILVACO ATLAS software. To optimize the charge transfer at the TiO2/dye/electrolyte interface, an Al-Modified TiO2 layer was used and its influence on photovoltaic performance was investigated. Optimized solar cell showed maximum power conversion efficiency of 7.67% with short-circuit current of 16.50 mA/cm2 and open-circuit voltage of 0.72 V at 100mW cm−2 (1.5 A M). To resolve the difficulties regarding the use of liquid electrolyte, a solid-state dye-sensitized solar cell (SS-DSSC) was simulated in which a P3HT layer acts as a hole collector instead of liquid electrolyte. SS-DSSC indicated a favorable performance deliver a short-circuit photocurrent of 12.70 mA cm−2 and open-circuit voltage of 0.67 V.
|
پژوهشگران
|
سینا دلیر (نفر دوم)، مسعود مهرابیان (نفر اول)
|