عنوان
|
Development of graphene oxide/calcium phosphate coating by pulse electrodeposition on anodized titanium: biocorrosion and mechanical behavio
|
نوع پژوهش
|
مقاله چاپشده در مجلات علمی
|
کلیدواژهها
|
calcium phosphate, graphene oxide, pulse electrodeposition, biocorrosion resistance, mechanical properties
|
چکیده
|
In this work, graphene oxide (GO) reinforcement was used to improve the strength and fracture toughness of the calcium phosphate (CaP) coating applied on the anodized titanium using pulse electrodeposition. The results showed that the CaP coating consisted of mixed phases of octacalcium phosphate (OCP), dicalcium phosphate dehydrate (DCPD) and hydroxyapatite (HAp); however, compositing of this coating with GO caused deposition of the pure HAp phase. Moreover, the nanohardness and elastic modulus for the CaP-GO coating increased over 52% and 41%, respectively, as compared to those measured for the GO-free coating. An improvement of about 16% in the adhesion strength of the CaP coating composited with GO to the anodized titanium was also arisen from improving integrity, crystallinity and decreasing the elastic modulus mismatch of this coating with titanium substrate. Finally, uniformity in the microstructure and more biostability of the CaP-GO coating led to its better protection against the corrosion of anodized titanium. Keywords: calcium phosphate, graphe
|
پژوهشگران
|
مریم موسوی فر (نفر سوم)، جعفر خلیل علافی (نفر دوم)، لیلا فتح یونس (نفر اول)
|