|
چکیده
|
We propose and numerically investigate a cascaded dual-absorber architecture that combines the formamidinium-stabilized double perovskite (FA)2BiCuI6 and the vacancy-ordered perovskite Cs2SnBr6 to achieve broad, complementary light harvesting while preserving lead-free chemistry. Device structures were modelled in SCAPS-1D under AM1.5G (1000 W·m−2) and 300 K, using P3HT as the hole transport layer, TiO2 as the electron transport layer, and FTO/Ag contacts. The baseline single-absorber device FTO/TiO2/(FA)2BiCuI6/P3HT/Ag reproduces the simulated performance (VOC = 0.95 V, JSC = 11.37 mA·cm−2, FF = 87.62%, PCE = 9.49%). Inserting Cs2SnBr6, which acts as both a complementary absorber and a band-alignment interlayer, between TiO2 and (FA) 2BiCuI6 produces a cascaded (FTO/TiO2/Cs2SnBr6/(FA)2BiCuI6/P3HT/Ag) with markedly improved photon collection and reduced recombination, raising simulated PCE to 25.97% (VOC = 1.05 V, JSC = 28.20 mA·cm−2, FF = 87.13%). Systematic thickness optimization reveals strong sensitivity of device metrics to absorber geometries: a global optimum is predicted at (FA)2BiCuI6 = 200 nm and Cs2SnBr6 = 2500 nm, where PCE reaches 29.43% alongside VOC = 1.07 V, JSC = 31.12 mA·cm−2, and FF = 87.74%. The optimized device incorporates a 200 nm (FA) 2BiCuI6 absorber with a donor density of 1 × 1013 cm−3 and a 2500 nm Cs2SnBr6 absorber with an acceptor density of 1 × 1018 cm−3, while maintaining low interface defect densities at both the TiO2/Cs2SnBr6 and Cs2SnBr6/(FA) 2BiCuI6 interfaces. Mechanistically, the performance gain arises from spectral complementarity between the two absorbers, improved internal quantum efficiency, and mitigation of interfacial recombination through energetic and physical buffering by Cs2SnBr6. These findings establish cascaded, lead-free double-perovskite stacks as a promising route toward high-efficiency, environmentally friendly photovoltaics and provide specific guidance for experimental realization via thickness engineering and interface control.
|